Supprimer mystrom-wifi-button-plus/README.md

mystrom-wifi-button-plus/README.md

@@ -1,54 +0,0 @@
-# myStrom's WiFi Button Plus ESPHome configuration yaml
-
-## Flash
-
-```
-JP1
-(○) GPIO0      ➙ GND (Bootloader mode)
-[○] TX (GPIO1) ➙ Programmer's RX
-[○] RX (GPIO3) ➙ Programmer's TX
-[○] VCC        ➙ +3.3V
-[○] GND        ➙ 0V (GND)
-```
-
-## Schematics
-
-```mermaid
-erDiagram
-    ESP32 {
-    }
-
-    ESP32 ||--|| GPIOs : ""
-    ESP32 ||--|| I2C : ""
-    ESP32 ||--|| ADC : ""
-
-    I2C {
-        GPIO21-GPIO22 SHTC3
-    }
-
-
-    ADC {
-        GPIO32  Battery-probe
-    }
-
-    GPIOs {
-        GPIO38 Top-left-key
-        GPIO39 Top-right-key
-        GPIO37 Bottom-left-key
-        GPIO36 Bottom-right-key
-        GPIO04 Red-LED
-        GPIO18 Green-LED
-        GPIO23 White-LED
-        GPIO33 USB-power-probe
-    }
-
-```
-
-## Notes
-
- - GPIO13, GPIO14 , GPIO19 and GPIO27 are reserved for an Eink display.
- - GPIO9 and GPIO10 are reserved for the QuadIO flash mode.
- - GPIO25 and GPIO26 are reserved for an unknown device.
- - GPIO34 is reserved for the unpopulated SW5.
- - GPIO35 is reserved for the unpopulated and unknown U7.
- - There are traces and footprints for a buzzer.